Siemens V20 series AC Frequency Inverter for 1.1kW (1.5HP) 230V three phase motor in VxF control to 6A. Converts fixed 22frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Size FSAC: 91mm Wide x 147mm Deep x 161mm High IP20.
Cooling: Single fan.
Overload: 150% x 60 seconds followed by 94.5% for 240 seconds (High Overload)
Speed Control Range: 0-550Hz
Braking: via optional Dynamic braking module – see linked products below.
Integrated Keypad, 2 Analogue/Digital Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Output, 1 Relay Contact Set, 1 Expansion Port, DC Bus Terminals, Terminals for Modbus RTU or USS over RS485 Communications.
Input Current: 14.7A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C2 (Industrial or restricted Domestic).
Rated 40°C Ambient.
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 15mm or 0mm between V20 drives.
Heat Loss at max output: 72W
Mounting via 4 holes at rear for M4 screws on 79mm x 140mm centres.
Manufacturer part number is 6SL3210-5BB21-1BV1. This replaces 6SL3210-5BB21-1AV0 which is a physically larger; frame size has been reduced.