Vacon 20X Series AC Inverter for 3kW (4HP) 380V 3 Ph motor in VxF or Sensorless Vector control to 7.6A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
Size MU2 – 169.2mm Wide x 153.8mm Deep (excluding keypad and/or isolator, if fitted) x 294.7mm High. IP66/Type 4X
Overload: 150% x 60 seconds every 10 minutes, 200% x 2 seconds every 20 seconds
Speed Control Range: 0-320Hz.
Braking: Minimum 100 Ohm external resistor (not supplied) – use the ‘Which Resistor’ button on this page.
Safe Torque off (STO) to SIL3
2 x Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 1x Digital Output, 2 x Relay Contact set, terminals for RS485/Modbus communications.
Input Current: 9.6A
Input Voltage: 380-480V-15% +10% Three Phase at 50-60Hz ±10%
EMC Filters: IEC EN61800-3 Category C2 1st Environment (Industrial and Domestic).
Rated 40°C Ambient.
Ventilation space in above: 30mm
Ventilation space below: 60mm
Ventilation space at sides: 15mm
Heat Loss at max output: [not specified] Mounting via 4 x holes for M5 Screws at rear on 120mm x 268.8mm centres.
Manufacturer part number is VACON0020-3L-0008-4-X