ABB Drives ACS 800 AC Direct Torque Control (DTC) Frequency Inverter with Keypad for 22kW (40HP) 380V 3 Ph motor to 45A at High Overload or 30kW (50HP) to 59A when Fan/Pump rated. Simple to set-up with 400V three phase input for a standard AC Induction motor.
R5 Size – 265mm Wide x 389mm Deep x 814mm high.
IP21 Enclosure Protection Rating.
Light Overload Use – 110% x 60seconds every 5 minutes at 59A, 30kW.
Heavy Duty Use – 150% x 60 seconds every 5 minutes at 45A, 22kW.
Speed Control Range – 0/300Hz.
Brake Chopper included.
Operator Keypad has a Multilingual Alpha Numeric Display (4 lines x 20 characters). Can be mounted remotely – see order code option 23635 below.
3 x Analogue Inputs, 2 x Analogue Outputs
7 x Digital Inputs, 3 x Digital (Relay) Outputs – maximum continuous current 2A, 24VDC or 115V/230VAC
1 x Reference Voltage Output +/- 10V, 10mA
Auxiliary Power Supply Output: +24VDC, 250mA
THD < 5%
Nominal Current – 59A.
Input Voltage – 380 to 415V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Heat Loss at max output – 990W.
Full part number is – ACS800-31-0050-3