ABB ACS355 AC Frequency Inverter for 7.5kW (10HP) 380V 3 Phase motor in VxF or Sensorless Vector control to 15.6A. Simple to set-up with a DC supply from a suitable solar panel arrangement or 400V three phase input for a standard AC Induction motor or permanent magnet synchronous motor.
Drive Includes N827 Option Solar Pump Software
No Keypad included.
Dimensions: Size R3 169mm Wide x 169mm Deep x 169mm high (236mm high including fastenings and clamp plate).
Enclosure Rating: IP20.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range: 0-600Hz.
Braking: at full load for 10 seconds every 120 seconds to 40 ohms minimum, 60 ohms Maximum external resistor (not supplied). Use the ‘Which Resistor’ button on this page.
Features:- 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current: 22.1A.
Input Voltage: 380-480V Three Phase at 50/60Hz ±5%.
EMC Filters: to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Mounting: Cubicle mount (or Wall mount with the optional Cover and Gland Box) in clean environment onto 35mm DIN rail or via 4 x 5mm diameter holes at rear on 148mm x 191mm centres.
Ambient: Rated at 40°C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm (drives can be mounted side by side)
Heat Loss at max output: 204.2W.
Part number: ACS355-03E-15A6-4+N827 (3AUA0000157195+N827).