ABB ACS355 AC Variable Frequency Inverter in IP66 Form for 7.5kW (10HP) 380V 3 Phase motor in VxF or Sensorless Vector control to 15.6A. Simple to set-up with a DC supply from a suitable solar panel arrangement or 400V three phase input for a standard AC Induction motor or permanent magnet synchronous motor.
Drive Includes N827 Option Solar Pump Software.
Dimensions: R3 Size – 246mm Wide x 277mm Deep x 436mm high.
Enclosure rating: IP66.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range: 0-600Hz.
Braking at full load for 10 seconds every 120 seconds to 40 ohms minimum, 60 ohms Maximum external resistor (not supplied). Use the ‘Which Resistor’ button on this page.
Features:- Assistant Operator Panel (Advanced Keypad), 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply from PV Panels or for common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current: 22.1A.
Input Voltage: 380-480V Three Phase at 50/60Hz ±5%.
EMC Filters: to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Mounting: Wall mounting onto 35mm DIN rail, or via 4 x 5mm diameter holes at rear on 148mm x 191mm centres.
Ambient: Rated at 40°C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm (drives can be mounted side by side)
Heat Loss: 204W at max output.
Part number: ACS355-03E-15A6-4+B063+N827 (3AUA0000157215).