ABB ACS310 AC Frequency Inverter for 1.1kW (1.5HP) 380V 3 Phase Centrifugal Fan or Pump in VxF control to 3.3A.
Supplied without a Keypad. Optional Keypad (front mounted) is available see linked products below.
Size R1 – 70mm Wide x 162mm Deep x 170mm high (239mm high including fastenings and clamp plate). IP20.
Overload – 110% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range – 0-500Hz.
Braking – None.
2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set, RS485 Modbus-RTU,
Programmable from a PC via ‘DriveWindow Light’ or using the ABB FlashDrop tool.
Input Current – 6A, or 3.1A when supplied via a minimum 6.4mH AC Input choke (see the products linked below) to reduce the metered kVA from 4.1kVA per drive, to 2.1kVA.
Input Voltage – 380-480V Three Phase ±10% at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial) for shielded cable lengths up to 30m.
Wall mount in clean environment or cubicle mount.
Rated at 50°C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – 60W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 50mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is – ACS310-03E-03A6-4 (3AUA0000039628).