ABB Drives ACS 150 AC Frequency Inverter with Keypad and Potentiometer for 4kW (5.5HP) 380V 3 Ph motor in VxF control to 8.8A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
Dimensions: R1 Size 70mm Wide x 144mm Deep x 202mm high (plus cable clamp plate at 37mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 70 Ohm Minimum, 110 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the ‘Brake Resistor Calculator’ on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters: to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current: 13.6A, or 7.7A when supplied via a minumum 2.7mH AC Input choke (see the products linked below) to reduce the metered kVA from 9.4kVA per drive, to 5.3kVA.
Input Voltage: 380V to 480V three phase +-10% at 50/60Hz.
Mounting: Cubicle mount (or Wall mount with the optional Cover and Gland Box) onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Ambient: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 94W at maximum output.
Part number: ACS150-03E-08A8-4 (68581818)