ABB Drives ACS 150 AC Frequency Inverter with Keypad and Potentiometer for 2.2kW (3HP) 380V 3 Ph motor in VxF control to 5.6A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
Dimensions: R1 Size 70mm Wide x 144mm Deep x 202mm high (plus cable clamp plate at 37mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 100 Ohm Minimum, 200 Ohm Maximum external resistor (not supplied), see the Resistor options linked below or use the ‘Brake Resistor Calculator’ on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters: to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current: 9.6A, or 4.8A when supplied via a minimum 4.6mH AC Input choke (see the products linked below) to reduce the metered kVA from 6.6kVA per drive, to 3.3kVA.
Input Voltage: 380V to 480V three phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail ,or use the screw fixings for side or rear mounting. Wall mount in a clean environment, when fitted with the optional top cover and gland box linked below.
Ambient: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 79W at maximum output.
Part Number: ACS150-03E-05A6-4 (68581796)