ABB Drives ACS 150 AC Frequency Inverter for 0.25kW (0.33HP) and 0.37kW (0.5HP) 380V 3 Ph motor in VxF control to 1.2A. Simple to set-up for speed control of a standard three phase AC Induction motor.
Dimensions: R0 Size 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 200 Ohm Minimum, 1180 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the ‘Brake Resistor Calculator’ on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters: EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current: 2.2A, or 1.1A when supplied via a minimum 6.4mH AC Input choke (see the products linked below) to reduce the metered kVA from 1.5kVA per drive, to 0.8kVA.
Input Voltage: 380V/480V three phase +-10% at 50/60Hz.
Mounting: Cubicle mount Cubicle mount (or Wall mount with the optional Cover and Gland Box) in a clean environment via symmetrical DIN rail or use the screw fixings for side or rear mounting.
Ambient: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 14W at maximum output.
Part number: ACS150-03E-01A2-4 (68581737).
Replaces the ACS100 that is no longer manufactured.