ABB Drives ACS 150 AC Frequency Inverter with Keypad and Potentiometer for 3kW (4HP) 380V 3 Ph motor in VxF control to 7.3A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
R1 Size – 70mm Wide x 144mm Deep x 202mm high (plus cable clamp plate at 37mm) IP20 case.
Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 70 Ohm Minimum, 150 Ohm Maximum external resistor (not supplied) – see the Resistor options linked below or use the ‘Brake Resistor Calculator’ button on this page.
Features – Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current – 11.6A, or 6.1A when supplied via a minimum 4.6mH AC Input choke (see the products linked below) to reduce the metered kVA from 8kVA per drive, to 4.2kVA.
Input Voltage – 380 to 480V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm.
Heat Loss at max output – 74W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is – ACS150-03E-07A3-4 (68581800)